[Hi-Speed Burst] - Panasonic LUMIX DMC-TS1 Operating Instructions Manual

Digital camera model no. dmc-ts1
Hide thumbs Also See for LUMIX DMC-TS1:
Table of Contents

Advertisement

This is a convenient mode for shooting rapid movement or a decisive moment.
∫ Picture size and aspect ratio
1
Press 3/4 to select [SPEED PRIORITY] or [IMAGE PRIORITY] and then press
[MENU/SET] to set.
2
Press 3/4 to select the picture size and aspect ratio and then press [MENU/
SET] to set.
3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
3
Take pictures.
Still pictures are taken continuously while the shutter button is pressed fully.
Maximum Burst speed
Number of recordable
pictures
The burst speed changes according to the recording conditions.
The number of burst recording pictures are limited by the picture-taking conditions and the type
and/or status of the card used.
The number of burst recording pictures increase immediately after formatting.
Note
It will be a normal motion picture recording during the motion picture recording.
The flash setting is fixed to [Œ].
[QUALITY] is automatically fixed to [›].
You can take pictures suitable for 4qk6q/10k15 cm printing.
The focus range is 5 cm (Wide)/30 cm (Tele) to ¶.
The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
[SENSITIVITY] will be adjusted automatically as following. However, the [SENSITIVITY] will be
set higher to make the shutter speed faster.
When [SPEED PRIORITY] is selected: Adjust between [ISO200] and [ISO1600]
When [IMAGE PRIORITY] is selected: Adjust between [ISO500] and [ISO800]
Depending on the operating conditions, it may take time to take the next picture if you repeat
taking a picture.
Advanced (Recording pictures)

[HI-SPEED BURST]

approx. 10 pictures/second (Speed priority)
approx. 6 pictures/second (Image priority)
approx. 15 (Built-in memory)
¢
approx. 15 to 100
(Card)
¢ The maximum is 100.
- 75 -

Advertisement

Table of Contents
loading

Table of Contents