Table of Contents
Advertisement
[REC] Mode:
Taking pictures that match the scene being
recorded
(Scene Mode)
When you select a Scene Mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [
Press 3/4/2/1 to select the Scene Mode.
•
If you press [DISPLAY] when selecting a scene mode,
explanations about each scene mode are displayed.
•
You can switch menu screens from any menu item by rotating
the zoom lever.
Press [MENU/SET] to set.
•
The menu screen is switched to the recording screen in the selected Scene Mode.
Note
•
To change the Scene Mode, press [MENU/SET] and then press 1, and return to step
(when [MENU RESUME]
•
The Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed.
•
When you take a picture with a Scene Mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
•
The following items cannot be set in Scene Mode because the camera automatically adjusts
them to the optimal setting.
–
[SENSITIVITY]/[ISO LIMIT SET]/[METERING MODE]/[I.EXPOSURE]/[COLOR EFFECT]/
[PICT. ADJ.]/[MIN. SHTR SPEED]/[I.RESOLUTION]/[FLASH SYNCHRO]
Advanced (Recording pictures)
].
(P38)
is [OFF]).
- 91 -
2
above
Advertisement
Table of Contents
