Panasonic LUMIX DMC-TS1 Operating Instructions Manual page 178

Digital camera model no. dmc-ts1
Hide thumbs Also See for LUMIX DMC-TS1:
Table of Contents

Advertisement

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
It is recommended to use a card with SD Speed Class
recording motion pictures.
¢ SD speed class is the speed standard regarding continuous writing.
When you set the picture quality to [
card with "10MB/s" or greater displayed on the package.
In the event that it stops even after using a "10MB/s" card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P36).
Depending on the type of SD Memory Card or SDHC Memory Card, motion picture recording
may stop in the middle.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there are no remaining folder numbers that can be used.
(P159)
> Format the card after saving necessary data on a PC etc.
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.
(P33)
[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]
The AV cable is connected to the camera.
> Press [MENU/SET] if you want to delete this message at once.
> Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect.
This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P156,
161)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
The printer cannot print.
> Check the printer.
[NO BATTERY POWER REMAINS]
The remaining battery power is low.
> Charge the battery.
[THIS BATTERY CANNOT BE USED]
The battery cannot be recognized by the camera.
> Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Centre.
The battery cannot be recognized as its terminal is dirty.
> Remove any dirt etc. from the terminal.
[BATTERY COVER OPEN]
Card/Battery door is opened. The camera cannot be operated while the card/battery door is
opened.
Close it securely making sure nothing gets caught in it.
[CHECK THAT NO SAND, HAIR, OR OTHER OBJECTS ARE ON THE DOOR SEAL.]
Card/battery door is open.
The camera cannot be operated while the card/battery door is opened.
Others
¢
with "Class 6" or higher when
], [
] or [
], we recommend using a high-speed
- 178 -
(P36)
If you execute
(P34)

Advertisement

Table of Contents
loading

Table of Contents