Printing The Pictures - Panasonic LUMIX DMC-TS1 Operating Instructions Manual

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera's LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Set the mode dial to anything except [¨].
A USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
•
Use a battery with sufficient battery power or the AC adaptor (optional). When using the AC
adaptor (optional), use the multi conversion adaptor (optional). If the remaining battery power
becomes low while the camera and the printer are connected, the status indicator blinks and
the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect
the USB connection cable.
Connect the camera to a printer via the USB connection cable A
(supplied).
•
When the camera is connected to the printer, the cable disconnect prohibit icon [å]
appears. Do not disconnect the USB cable while [å] is displayed.
Press 3/4 to select [PictBridge(PTP)], and then
press [MENU/SET].
Connecting to other equipment
- 161 -
USB MODE
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
SELECT SET