Panasonic LUMIX DMC-TS1 Operating Instructions Manual page 153

Note
•
If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the
operating instructions for the devices.
•
Available linked operations between this unit and a Panasonic TV is different depending on the
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating
instructions of the TV for the operations that support on the TV.
•
Operation is not possible with a cable that is not based on the HDMI standard.
Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m), RP-CDHM30 (3.0 m)
•
VIERA Link will not work even if you connect the HDMI mini cable while the unit is connected to
the PC or the printer.
•
[HDMI MODE] (P35)
Outputting to HDMI:
–
When [PICTURE] is selected in the [MODE PLAY]
–
When [PICTURE ONLY] is selected in the [SLIDE SHOW]
–
When [CATEGORY SELECTION]
When the [VIERA Link] is set to On:
–
When the [ ] displayed on the TV screen is selected
–
When [PICTURE ONLY] is selected for the [SLIDE SHOW]
–
When [CATEGORY SELECTION]
¢ Other than [ ] (travel date)
–
It will be output as [720p] except for the above conditions.
•
The screen will be blacked out for a while when displaying in 1 screen, the [HDMI MODE]
of the camera is set to [AUTO] or [1080i], and [
this is not a malfunction.
•
[ ] ([TRAVEL DATE]), [
SELECTION] of the [SLIDE SHOW] cannot be selected when the [
screen is selected.
Advanced (Playback)
[1080i] is valid only for the following conditions:
¢
is selected in the [SLIDE SHOW]
¢
is selected for the [SLIDE SHOW]
] ([AVCHD Lite]), or [
] displayed on the TV screen is selected, but
] ([MOTION JPEG]) in the [CATEGORY
- 153 -
(P35)
] displayed on the TV