Panasonic LUMIX DMC-TS1 Operating Instructions Manual page 84

•
When intelligent auto mode is selected in step
subject or recording situation can be performed.
∫ Scene detection
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its colour changes to the usual red.
[i-PORTRAIT]
>
¦
[i-SCENERY]
[i-LOW LIGHT]
[i-MACRO]
•
[ ] is set if none of the scenes are applicable, and the standard settings are set.
¦
∫ Face detection
When [ ] is selected, the camera automatically detects a person's face, and it will adjust
the focus and exposure (P108).
Note
•
Following [MOTION PICTURE] mode menu cannot be set because the camera sets
automatically.
[WHITE BALANCE]/[I.EXPOSURE]
•
It is only possible to set the [COLOR MODE] to [STANDARD], [B/W], or [SEPIA].
•
Due to conditions such as the ones below, a different scene may be identified for the same
subject.
–
Subject conditions: When the face is bright or dark, The size of the subject, The distance to
the subject, The contrast of the subject, When the subject is moving, When zoom is used
–
Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
shaken
•
To take pictures in an intended scene, it is recommended that you take pictures in the
appropriate recording mode.
•
Face detection may become slower or it may not detect underwater.
Advanced (Recording pictures)
When set to intelligent auto mode
1
- 84 -
, motion picture recording matching to the