¿
[REC] mode:
Taking pictures that match the scene being
recorded
(Scene mode)
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
1
Slide the [REC]/[PLAYBACK] selector switch to [!].
2
Set the mode dial to [¿].
3
Press 3/4/2/1 to select the scene mode.
•
You can switch menu screens from any menu item by rotating
the zoom lever.
4
Press [MENU/SET] to set.
•
The menu screen is switched to the recording screen in the
selected scene mode.
∫ About the information
•
If you press [DISPLAY] when selecting a scene mode in step
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
To change the scene mode, press [MENU/SET] and then press 1, and return to step
•
•
Refer to
P54
for information about the shutter speed.
•
The scene mode flash setting is reset to the initial setting when the scene mode is changed.
•
When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
•
The following items cannot be set in scene mode because the camera automatically adjusts
them to the optimal setting.
–
[INTELLIGENT ISO]/[SENSITIVITY]/[I.EXPOSURE]/[COLOR MODE]
•
[I.EXPOSURE] is activated automatically in the following scene modes.
–
[PORTRAIT]/[SOFT SKIN]/[SELF PORTRAIT]/[SCENERY]/[SPORTS]/[NIGHT PORTRAIT]/
[PARTY]/[CANDLE LIGHT]/[BABY1]/[BABY2]/[SUNSET]/[HIGH SENS.]
Advanced (Recording pictures)
- 60 -
3
,
3
above.