Panasonic LUMIX DMC-TS1 Operating Instructions Manual page 48

•
When using the zoom function, an estimate of the focus range will appear in conjunction
with the zoom display bar. (Example: 0.3 m –¶)
¢ The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting.
∫ Extra optical zoom mechanism
When you set the picture size to [
area is cropped to the centre 3M (3 million pixels) area, allowing a picture with a higher
zoom effect.
Note
•
The digital zoom cannot be set when õ,
•
The indicated zoom magnification is an approximation.
•
"EZ" is an abbreviation of "Extra optical Zoom".
•
The optical zoom is set to Wide (1k) when the camera is turned on.
•
If you use the zoom function after focusing on the subject, focus on the subject again.
•
When using the digital zoom, [STABILIZER] may not be effective.
•
When using the digital zoom, we recommend using a tripod and the self-timer
pictures.
•
The extra optical zoom cannot be used in the following cases.
–
In macro zoom mode
–
In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE] or
[FILM GRAIN] in scene mode
–
when recording motion pictures
•
[DIGITAL ZOOM] cannot be used in the following cases.
–
In [TRANSFORM], [BABY1]/[BABY2], [PET], [HIGH SENS.], [HI-SPEED BURST],
[FLASH BURST], [PIN HOLE] or [FILM GRAIN] in scene mode
–
When [INTELLIGENT ISO] is set
Basic
] (3 million pixels), the 12M (12.1 million pixels) CCD
or ¨ has been selected.
- 48 -
(P63) for taking