Ovm Tools; Location Of Hydraulic Jack - SSANGYONG REXTON Owner's Manual

8–28 SERVICE AND MAINTENANCE
You should therefore avoid :
• Frequent repeated cold starts.
• Actuation of the starter for an unnec-
essarily long time during starting (fuel is
injected during the starting procedure).
• Allowing the tank to become empty (an
irregular fuel supply leads to overheating)
• Starting the engine by pushing or tow-
ing (unburned fuel may enter the cata-
lytic converter) : use jump leads.
Have all maintenance work carried out by a
Ssangyong Dealer or Ssangyong Authorized
Service Operation. You can then be certain
that all components of the vehicle's
electrical, injection and ignition system will
be operating correctly, that your vehicle has
a low level of pollutant emission and that the
catalytic converter system will have a long
life.

OVM TOOLS

1 Screw jack
2. Driver (+, -)
3. Open end wrenches
4. Wheel nut wrench
5. Pliers
6. Connecting rod
7. Tools bag

LOCATION OF HYDRAULIC JACK

• Lift up the cover lever located at left side
of the luggage room to open the cover.
• Rotate the yellow colored handle coun-
terclockwise to release the jack and pull
out jack.
CAUTION
When installing the jack, insert it
and rotate the handle clockwise to
hold the jack firmly and not to move
during driving.