For Getting Maximum Cooling And Heating - SSANGYONG REXTON Owner's Manual

FOR GETTING MAXIMUM
COOLING AND HEATING
If you press the AUTO switch and set the
temperature to LO with temperature control
switch, the air conditioner operates with
maximum fan speeds and the inside air
recirculrates. The air flow direction will be
selected to ( ).
If you press the AUTO switch and set the
temperature to HI with temperature control
switch, the air conditioner operates with
maximum fan speeds and outside air will
flow into the vehicle. The air flow direction
will be selected to ( ).
To stop the maximum cooling and heating,
press the OFF switch.
MANUAL OPERATION OF EACH
FUNCTION
By operating the relevant switch of the au-
tomatic air conditioner, you can control the
air conditioner operation, airflow direction,
fan speed and air source by manually.
Under the automatic cooling.heating, if you
control the specific function manually by
operating the air conditioner switch, fan
speed control switch, airflow mode switch
or air source selection switch, then the
other functions will continue automatic
operations. At this moment, the AUTO indi-
cator goes out.
If you want full automatic functions again
after manual adjustment, press the AUTO
switch. At this moment, the AUTO indicator
comes on.
VENTILATION, HEATING AND AIR CONDITIONING* 5–11
SIDE VENT - SIDE BLEED
FUNCTION
Side vent has side bleed function that blows
air regardless of selected mode switch, so
it can prevent fogging or icing on the side
glasses by directing side vent toward side
glasses during the winter.