Seat Belt Height Adjustor - SSANGYONG REXTON Owner's Manual

4–22 SEAT AND RESTRAINT
The buckle and metal latch plate of the cen-
ter rear lap belt are identified by the "CEN-
TRE" mark. Be sure to check the marking
before wearing the center rear lap belt.
The metal latch plate of the center rear lap
belt can be fastened only into the buckle of
center rear lap belt buckle.
WARNING
Improper use of seat belts could
cause serious injury.
• Never wear the lap belt across your
abdomen.
• Lap belt should be fitted snugly
around the hips, not the waist.
CAUTION
Damaged or incorrectly fastened seat
belt could cause serious injury.
Do not fasten the metal latch into in-
correct buckle by force.
NOTE
When fastening the rear seat shoul-
der belt or the center rear lap belt,
make sure the metal latch plate is
inserted into the correct buckle to
obtain maximum protection from the
seat belt.

SEAT BELT HEIGHT ADJUSTOR

The seat belt height adjustor is provided for
the front seat.
Press the side button and slide the retractor
upward or downward to obtain snug and
fit position. You can adjust to 4 positions.
This is particularly important if a smaller
person has previously selected a lower po-
sition. Too low or high a position can impair
comfort.