Selector Lever Positions - SSANGYONG REXTON Owner's Manual

Starting the Car
• After starting the engine, fully depress
the foot brake pedal before shifting the
selector lever to the "R", "D", "3", "2" or
"1" position. Be sure the vehicle has
completely stopped before attempting to
shift the selector lever into "R" or "P".
1. Keep the foot brake pedal depressed
and shift into a driving gear.
2. Release the parking brake and foot
brake. Depressing the accelerator pedal
slowly will gradually set the vehicle in
motion.

SELECTOR LEVER POSITIONS

P: Park
Use this position when the vehicle is parking,
starting the engine or stationing the vehicle.
To shift into any other position, depress the
brake pedal(ignition switch "ON")
To shift into P position, you have to com-
pletely stop the vehicle.
R: Reverse
Use this position to reverse the vehicle. To
shift into R position from P or N position,
completely stop the vehicle and depress the
brake pedal.
STARTING AND OPERATING 2–7
N: Neutral
It indicates neutral position and use this po-
sition for temporarily parking.
CAUTION
Never shift into N position while
driving, or the transmission will be
damaged.
When you stopping the vehicle on the
uphill or downhill roads in N
position, depress the brake pedal.
To shift into D or R from N position
after stopping the vehicle, you have
to depress the brake pedal.