SSANGYONG REXTON Owner's Manual page 77

RELATIVE ALTIMETER
Use this to see the specific area's altitude;
it shows the specific area's relative altitude
based on the current altitude of the vehicle.
Mode setting of the relative altimeter
1. Press the MODE switch over 1 second.
Indication type
• To see the difference of the altitude
Set the vehicle's altitude to 0 by press-
ing UP and DOWN switches simulta-
neously over 1 second.
dicated altitude after arrival.
INSTRUMENTS AND CONTROLS 3–25
• To see the destination's altitude
1. Enter the altitude of the point where you
know the altitude from the sea level.
read the in- 2. The indicated value on the destination is
the altitude from the sea level.
The altimeter operates by using
changes of atmospheric pressure.
So, sometimes, the indicated altitude
may different due to changing atmo-
spheric pressure in the same place,
however,
malfunctions.
CAUTION
it is normal, not