Automatic Transmission Emergency Shifting - SSANGYONG REXTON Owner's Manual

2–14 STARTING AND OPERATING
If the shifting is not available, reset the
safety mode.
• How to reset the safety mode
1. Park the vehicle and place the selector
lever to "P" position.
2. Stop the engine and wait for over 10
seconds.
3. Start the engine.
• Symptoms after resetting the safety
mode
- If the vehicle is normally operational af-
ter resetting, the troubles are corrected.
- The gear may be fixed at 2nd forward
gear in "D" position or 2nd reverse gear
in "R" position.
CAUTION
• If you find any symptom caused by
mechanical or electrical defective
in transmission, stop the vehicle
immediately and reset the safety
mode.
• If abnormal operation of the trans-
mission (fixed at 2nd forward gear
in "D" position or 2nd reverse gear
in "R" position) is still present,
have the transmission checked as
soon as possible at the nearest
Ssangyong Dealer or Ssangyong
Authorized Service Operation.
AUTOMATIC TRANSMISSION
EMERGENCY SHIFTING
PROCEDURE
Your vehicle has a shift lever lock control
system. Before you can shift from park (P),
the ignition must be ON and you must de-
press the brake pedal.
If you cannot shift out of P with the ignition
ON and the brake pedal depressed:
1. Turn ignition off.
2. Push the shift lock release lever by in-
serting a proper stick. Then, with the
brake pedal depressed, move the selec-
tor lever to N (neutral).
3. Start engine and shift into the gear you
want.
4. Have your vehicle repaired by
Ssangyong dealer or authorized service
operation as soon as possible.