Sanyo HEC-DR8700 Instruction Manual page 8

NAME/FUNCTION OF EACH PART (continued)
Remote control
＊ All display icons are shown here
for explanation.
INSTANT STOP button
Used if you have felt abnormal physical
sensation or want to stop the massager
immediately.
OPERATION ON/OFF
button
Used for switching the operation
ON/OFF.
HOME POSITION
button
Used to return the back rest, foot rest
and seat to their home positions.
BEST POSITION
button
Used to adjust the back rest, foot
rest and seat to the three preset
best positions.
FULL AUTO button
Used to measure the degree
of stress and stiffness using
the sensors and massage your
body automatically based on
the measurement results.
AGE buttons
Used to measure the degree
of stress and stiffness.
AUTOMATIC COURSE
buttons
Used to select the desired type
of Automatic Course.
MANUAL (ROLLER)
MASSAGE buttons
Used to select the desired type
of upper body massage.
ROLLER ADJUST
buttons
Adjusts the width and speed of the
massaging rollers in five stages.
7
UPPER BODY STRENGTH ADJUST buttons
Adjusts the strength of upper body massaging in five stages.
LOWER BODY STRENGTH ADJUST buttons
Adjusts the strength of lower body massaging in three
stages. During the Whole Body Sensor Automatic Courses,
the lower body massaging can be turned off.
RECLINING buttons
Adjusts the angles between the back rest, seat and
the foot rest. The back rest, seat and foot rest move
in conjunction with each other.
FOOT REST buttons
Adjusts the angle of the foot rest.
ROLLER POSITION buttons
Used to position the massaging rollers at
your shoulders or move them up and down.
WHOLE BODY SENSOR
AUTOMATIC COURSE buttons
Used to select the desired type of Whole
Body Sensor Automatic Course.
MANUAL (AIR) MASSAGE buttons
Used to select the desired type of lower body air massaging.
SHIATSU ON/OFF buttons
Used to turn ON/OFF shiatsu massage for your calves and soles (the
corresponding lamp lights up when the shiatsu massage is ON).
SENSOR ADJUST button
Used if the sensors do not detect stress and stiffness correctly due
to your skin condition such as dry skin (the red lamp lights up
when the sensor adjustment is ON).
SOLE WARMER ADJUST button
Used to turn ON (HIGH/LOW) or OFF the sole warmer (the HIGH
lamp lights up when the sole warmer is ON in HIGH mode; the
LOW lamp lights up when the sole warmer is ON in LOW mode).