Download  Print this page

SANYO HEC-DR8700 Instruction Manual Page 25

Massage lounger.
Hide thumbs

Advertisement

5
Press the desired ROLLER MASSAGING button.
Refer to pages 25 - 26 for details of the contents
of massage.
For spine stretching (full), the shoulder position
is first measured. When the position of shoulder
is not correct, adjust the position of massaging
rollers. (See page 19)
During massaging operation, the operation can be
changed to other manual massage, Whole Body
Sensor Automatic Course or Automatic Courses.
It is possible to operate the upper body massage
and lower body massage simultaneously.
6
Adjust the height, width, speed, and strength of the massaging rollers.
There are some adjustments which are not possible, depending on the type of massage chosen.
Adjusting the height of massaging rollers.
Press the button.
The massaging rollers will move up
if the UP (
continuously and move down if
the DOWN(
continuously.
The approximate position of the
massaging rollers is indicated by
the lamp on the remote control.
Adjusting the width of the massaging rollers.
Press the button.
Finishes massaging automatically by timer operation.
The massaging rollers are moved to the upper position
and are stopped automatically approx. 15 minutes after
starting the operation. The beep sounds and the lamp
on the remote control will turn off.
If a different course button (manual) is pressed during
the course of operation, the massage will be completed
by operation of the timer approx. 30 minutes after starting
the massage selected first.
) button is pressed
) button is pressed
T h e w id th o f th e
massaging rollers will
change each time the
button is pressed and is
indicated by the lamp
on the remote control.
(in five stages)
ROLLER MASSAGE buttons (for upper body)
Adjusting the strength of roller massaging.
Press the button.
The strength of the
massage will change
each time the button
is pressed, and is
indicated by the lamp
on the remote control.
(in five stages)
Adjusting the movement speed of massaging rollers.
Press the button.
(See page 25 - 26)
T h e s p eed o f t h e
massaging rollers will
change each time the
button is pressed, and
is indicated by the lamp
on the remote control.
(in five stages)
The massaging
rollers are moved
to the upper
position and are
stopped.
[at the origin]
24

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: