④ Massages according to detected stiffness.
FULL AUTO : Massages according to detected
Adjusts the operation and strength of standard massaging
according to the measured degree of stiffness.
The STRESS indicator disappears.
Adjust the strength of massage.
Each time the UPPER button is pressed, the strength of upper body
massaging can be adjusted in five stages.
(The strength is displayed by the lamp on the remote control.)
Each time the LOWER BODY STRENGTH
ADJUST button is pressed, the strength
of lower body massaging (air) can be
adjusted in three stages. (The strength
is displayed by the lamp on the remote
The ON/OFF state of sole/calf shiatsu
massage toggles each time the button
(when calf/sole shiatsu massage is on,
the corresponding lamp is lit.)
Finishes massaging automatically by timer
Massaging rollers are moved to the upper position, and stop
The beep sounds and the lamp on the remote control will turn off.
The massaging time differs according to the detected stiffness,
but the maximum is approx. 20 minutes.
Try to be relaxed while you are massaging.
Immediately after taking a bath or when watching TV, you may not be
able to measure the degrees of stress and stiffness correctly.
Measured based on heart rate variability .
Stiffness Measured based on the amount of perspiration on your hand.
The measurement results show the biological response of your body and may not match your feelings of stress and stiffness.
Heart rate variability depends on age that is classified into three generations.
stress and stiffness.
If you continue to press the " "
button until the illumination of
the lower body strength scale
turns off, you can turn off the
massaging of the lower body.
If you press the "
the massaging will resume.
When it is felt that the massaging on the soles
or calves is too strong even when reducing the
strength of lower body (air) massaging, use the
SHIATSU ON/OFF button or put a towel etc. on
those massaged parts.
rollers are moved
to the upper
position and are
[at the origin]