Download  Print this page

How To Place The Massager - SANYO HEC-DR8700 Instruction Manual

Massage lounger.
Hide thumbs

Advertisement

HOW TO PLACE THE MASSAGER

How to move the massager
When carried by two people.
Hold by the back rest and foot rest when
moving.
Foot rest
NOTE
Before moving the massager, be sure to remove the power
plug from the outlet.
Be careful not to step on the power cord, remote control or
sensor during movement.
Be sure to move the massager with the assistance of another
person on an easily damaged floor surface or concrete surface.
Decide where to place it
1
Lay a carpet, etc. on the set-up
area.
To prevent damaging the floor and muffle
the noise while massaging.
NOTE
Place the massager on a level floor surface.
Keep the massager at least 1 m (39
Otherwise, the program may be disturbed by noise.
Do not keep the massager in a place with high humidity like a bathroom.
Do not keep the massager in a place where it will be exposed to direct sunshine for an extended
period, yor in a place near a heater where the temperature may reach high levels.
9
Back rest
Carpet
3
") away from AV products like a TV or radio.
/
8
When moving using the casters.
Lift up the front and move using the casters.
Press the BEST POSITION
button to fold down the
back rest.
WARNING
Do not suddenly release your hand
while raising the foot rest manually.
To ensure safety, release
your hand
gently from
the foot rest.
2
Ensure there is sufficient space
to allow the massager to recline.
In order not to touch the wall or other things
when reclined, allow a clearance of 60 cm
(23
5
/
") or more to the front and 60 cm (23
8
or more to the back.
Foot rest
/
60 cm (23
5
")
8
or more
Casters
Slowly
5
/
")
8
/
60 cm (23
5
")
8
or more
Back rest

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: