Features Of Courses; Massaging; Whole Body Sensor Automatic Courses; Automatic Courses - Sanyo HEC-DR8700 Instruction Manual

Massage lounger
Hide thumbs Also See for HEC-DR8700:
Table of Contents

Advertisement

FEATURES OF COURSES

WHOLE BODY SENSOR AUTOMATIC COURSES

Massaging on the degree of stress and stiffness detected by sensors
Features of courses
Automatic massages based on the
degrees of stress and stiffness
measured by sensors prior to

massaging.

Massages using a whole
body Sensor automatic
course program based on
the degree of stiffness
detected by sensors.
The degree of stress and stiffness are measured by placing your fingers (hand) on the sensors.
Massaging of each course is possible without placing fingers (hand) on the sensor.
In this case the degree of stress and stiffness is not detected.

AUTOMATIC COURSES

Easy 1 or 2 - button operation
Massages automatically by effective
combination of gripping, kneading up,
kneading down, tapping, combo (tapping
and kneading), shiatsu, full stretching,
partial stretching, focus stretching, and
lower body (air) massage.
MANUAL COURSES
Full programable upper and lower body massage
Massages with your own adjustment of
massage types such as gripping,
kneading up, kneading down, tapping,
combo (tapping and kneading), shiatsu,
full stretching, partial stretching, focus
stretching, and lower body (air) massage.
When the massaging rollers detach from the body during the Whole Body Sensor Automatic Course or the
Automatic Course, the body pressure sensor will work to stop the operation by pulling back the massaging
rollers for safety. In such a case, begin the operation again from the start.
To stop the massage during operation.
Press the OPERATION ON/OFF button.
All the massaging will stop.
(The massaging rollers are moved
to the upper position and remain
in that position.)
Press the button for the current operation.
The massaging that corresponds to the
pressed button will stop. (The Massaging
rollers will stop at that point.)
Sub - courses
FULL AUTO
Fully automatic massage based on the
degrees of stress and stiffness
In stress measurement mode, only air massage
of your legs is performed.
STIFFNESS
Shiatsu massage to counteract stiffness
RECOVERY
Tapping massage to ease muscle fatigue
RELAX
Kneading massage to relax the whole body
Short massage to promote blood circulation
QUICK
(Reduced time course)
Sub - courses
NECK & SHOULDER
Massages mainly the neck and shoulders
LOWER BACK
Massages mainly the waist and lower back
COMFORT AIR COURSE
Air massage of the whole body
STRETCH
Stretch to relax the whole body
Multiple roller massages (for upper body) and air
massages (for lower body) are available.
If you have felt abnormal physical sensation
or want to stop the massager immediately.
Press the INSTANT STOP button.
All the massaging will stop and the lamp of
the remote control will turn off.
When you want to restart massaging, press
the OPERATION ON/OFF button.
(The massaging rollers move to the upper
position and remain in that position.)
After the movement, repeat the operation to
begin a massage.
Features of program
Features of program
Features of program
(See page 17 - 20)
(See page 21 - 22)
(See page 23 - 27)
16

Advertisement

Table of Contents
loading

Table of Contents