Playback; Viewing Movies - Sony QUALINA 002 Owner's Manual

Playback

Viewing movies

Make sure you have a recorded cassette
inserted into your camcorder.
Some of the operations are possible using the
Remote Commander.
When you want to play back recordings on
your TV, see page 55.
When playing back the tape, select the
(IN/OUT REC) menu, [VCR HDV/DV],
then [AUTO] (the default setting).
1
Open the LCD panel and adjust the
angle.
2
While pressing the green button, set
the POWER switch to VCR.
3
4
To adjust the volume
Adjust the volume by pressing VOLUME
– (decrease) / + (increase).
To stop playback
Press x (stop).
To pause
Press X (pause) during playback.
Press N (play) or X (pause) again to restart the
playback.
Playback stops automatically when the pause
mode continues for more than 3 minutes.
To fast forward or rewind
Press M (fast forward) or m (rewind) in stop
mode.
POWER switch
To review movies on the viewfinder
Close the LCD panel. Then, adjust the
viewfinder angle.
Indicators displayed during tape
playback
A Format of the playback signal
B Remaining battery
C Tape transport indicator
D Time code (hour: minute: second: frame)
Press (rewind) to go to the point
m
you want to view.
Press N (play) to start playback.
60
min
HDV1080
i
(HDV1080i or DV) / Recording mode (SP
or LP)
or tape counter (hour: minute: second)
The time code of this camcorder is of the
drop-frame system.
0:00:00:00
60
min
,continued
51
Playback