Connecting An Analog Vcr To The Computer Via Your Camcorder; Signal Conversion Function - Sony QUALINA 002 Owner's Manual

Connecting an analog
VCR to the computer
via your camcorder

– Signal conversion function

Connect an analog video device to your
camcorder using the A/V connecting cable
Connecting a computer
Refer to the manual supplied with the
application software for the system
requirements of the computer.
HDV/DV jack
Signal flow
b Note
• Select the (OTHERS) menu, [DISP OUTPUT],
then [LCD PANEL] (the default setting) (p. 76).
• Before connecting the i.LINK cable, select the
(IN/OUT REC) menu, [VCR HDV/DV], then [DV]
(p. 69). If you do this operation with the i.LINK
(supplied), and a digital device such as a
computer to your camcorder using the
i.LINK cable (supplied). Your camcorder
converts the analog video signal from the
VCR to a digital signal and transmits it to the
computer to be dubbed.
To use the signal conversion function,
application software to import video signals
must be installed on the computer.
When you have an S video jack
on your VCR
S video cable
(optional)
AUDIO/VIDEO jack
A/V connecting
cable (supplied)
i.LINK cable (supplied)
cable connected, the computer may hang up or may
not recognize this camcorder.
Yellow
White
Red
Dubbing/Editing
93