Sony QUALINA 002 Owner's Manual page 16

3
Connect the power cord to the wall
outlet.
4
While pressing the battery back down,
slide it in the direction of the arrow.
The charge lamp lights up and charging
starts.
z Tip
• If you press DISPLAY CHANGE during charging,
the display changes as follows:
When the battery was successfully
charged
The battery mark on the display window will
light up in the shape of a full battery (
indicates that the battery has been sufficiently
charged for use.
If you continue charging until the CHARGE
lamp turns off and FULL appears on the display
window, the battery has now been fully charged
and can be used for a little longer period.
Remove the battery pack from the AC Adaptor/
charger.
16
Getting started
Remaining battery
time
Remaining charging
time fro practical use
Remaining time until
full charge
) that
To attach the battery pack to the
camcorder
Press the battery pack and slide it down.
To remove the battery pack
1
Set the POWER switch to OFF.
2
Press BATT RELEASE and slide the
battery pack up.