Sony QUALINA 002 Owner's Manual page 45

8
Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
A picture profile indicator appears.
To cancel the picture profile recording
Select [OFF] in step 2, then press the SEL/
PUSH EXEC dial.
To check the picture profile settings
During recording or in the standby mode, press
STATUS CHECK (p. 33).
To copy the picture profile setting to
other picture profiles
1
Press PICTURE PROFILE.
2
Select the number of the picture profile
to be copied from by turning the SEL/
PUSH EXEC dial, then press the dial.
3
Select [SETTING] by turning the SEL/
PUSH EXEC dial, then press the dial.
4
Select [COPY] by turning the SEL/
PUSH EXEC dial, then press the dial.
5
Select the number of the picture profile
to be copied to by turning the SEL/PUSH
EXEC dial, then press the dial.
6
Select [YES] again by turning the SEL/
PUSH EXEC dial, then press the dial.
If you decide not to copy the settings, select
[NO].
7
Press PICTURE PROFILE.
To reset the picture profile settings
You can reset the picture profile settings by
picture profile number. You cannot reset all
picture profile settings at once.
1
Press PICTURE PROFILE.
2
Select the number of the picture profile
to be reset by turning the SEL/PUSH
EXEC dial, then press the dial.
3
Select [SETTING] by turning the SEL/
PUSH EXEC dial, then press the dial.
4
Select [RESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
5
Select [YES] by turning the SEL/PUSH
EXEC dial, then press the dial.
If you decide not to reset the picture profile,
select [NO].
6
Press PICTURE PROFILE.
b Note
• If you adjust all of the iris, shutter speed and gain
manually, you cannot obtain the effect of [AE
SHIFT].
• If you adjust the iris manually, you cannot obtain the
effect of [AT IRIS LMT].
• If the object is so bright that the aperture value set in
[AT IRIS LMT] is not appropriate, the shutter speed
may reach 1/2000 automatically.
• If you adjust the gain manually, you cannot obtain
the effect of [AGC LIMIT].
• If you select [CINEFRAME 24] when the shutter
speed is slower than 1/30, the shutter speed is
automatically set to 1/60.
• If you select [CINEFRAME 30] when the shutter
speed is slower than 1/15, the shutter speed is
automatically set to 1/30.
45
Recording