Sony QUALINA 002 Owner's Manual page 63

TRANS TIME
Select the time that takes to make a transition from the current setting to the
selected setting.
Duration from [2.0 sec] through [15.0 sec] are available. It is set to [4.0 sec] in the
default setting.
TRANS CURVE
Select the transition curve.
The figures below show the transition curve of each mode.
*1: parameter level
*2: transition of time
LINEAR
GSOFT STOP
SOFT TRANS
START TIMER
GOFF
5 sec
10 sec
20 sec
STEADYSHOT
GON
OFF (
Select to make the transition linear.
Select to make the transition slow at the end.
Select to make the transition slow at the
beginning and end, and linear in midway.
Select to start the shot transition immediately.
Select to start the shot transition after 5 seconds.
Select to start the shot transition after 10 seconds.
Select to start the shot transition after 20 seconds.
Select to activate the SteadyShot function. You can select the type of
the SteadyShot function in [STDYSHOT TYP].
) Select to deactivate the SteadyShot function. Select when recording
using a tripod. More natural pictures are produced.
You can also deactivate the SteadyShot function by using the
ASSIGN button assigned to the SteadyShot function (p. 80).
*1
*2
*1
*2
*1
*2
,continued
63
Using the Menu