Step 5: Setting The Date And Time - Sony QUALINA 002 Owner's Manual

Step 5: Setting the
date and time
Set the date and time when using this
camcorder for the first time. If you do not set
the date and time, the [CLOCK SET] screen
appears every time you turn on your
camcorder.
b Note
• If you do not use your camcorder for about 3
months, the built-in rechargeable button-type
battery gets discharged and the date and time
settings may be cleared from the memory. In that
case, charge the rechargeable button-type battery
(p. 110) and then set the date and time again.
1
Turn on your camcorder (p. 20).
2
Open the LCD panel and adjust the
angle.
Proceed to step 6 when you set the clock for
the first time.
22
Getting started
POWER switch
3
Press MENU.
4
Select the (OTHERS) menu by
turning the SEL/PUSH EXEC dial,
then press the dial.
OTHERS
RETURN
ASS I GN BTN
CLOCK SET
WORLD T I ME
LANGUAGE
BEEP
REC LAMP
FORMAT LAMP
MENU : END
[ ]
5
Select [CLOCK SET] by turning the
SEL/PUSH EXEC dial, then press the
dial.
6
Set [Y] (year) by turning the SEL/
PUSH EXEC dial, then press the dial.
You can set any year up to the year 2079.
7
Set [M] (month), [D] (day), hour and
minute in the same way as was done in
step 6, then press the dial.
For midnight, set it to 12:00AM.
For midday, set it to 12:00PM.