Rec Lamp; Data Code - Sony QUALINA 002 Owner's Manual

REC LAMP

GON
OFF
FORMAT LAMP
GON
OFF
Note
b
• The format lamp lights up according to the format of the playback or of an input signal from
another device when [VCR HDV/DV] on the
IRIS DIAL
You can select the rotation direction of the iris dial to open or close the iris.
GNORMAL
OPPOSITE

DATA CODE

Select the item to be displayed when you press DATA CODE (p. 53).
GDATE/CAM
DATE
LETTER SIZE
GNORMAL
2x
Select to turn on the camera recording lamps on the front and rear of
your camcorder during recording.
Select this setting in the following recording situations. The camera
recording lamps on the front and rear will not light up during
recording.
• When you do not want the subject to be nervous about being
recorded.
• When you are recording close to the subject.
• When the subject reflects the light of the recording lamp.
Select to turn on the format lamp. The lamp of the format that is
selected in [REC FORMAT] lights up when the POWER switch is set
to CAMERA. The lamp of the format that is selected in [VCR HDV/
DV] lights up when the POWER switch is set to VCR.
Select when you do not want to turn on the format lamp. The i.LINK
lamp also does not light up.
Select to rotate clockwise when looked at from the lens side to close
the iris and decrease the light volume.
Select to rotate counter clockwise when looked at from the lens side
to close the iris and decrease the light volume.
Select to display the date and time, or the camera settings data during
playback.
Select to display the date and time during playback.
Select to display the menu screen at normal size.
Select to display the selected menu item at double the normal height.
(IN/OUT REC) menu is set to [AUTO].
,continued
Using the Menu
75