[REC] Mode:
Taking Pictures that Match the Scene Being
Recorded
When you select a Scene Mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [
Press 3/4/2/1 to select the Scene Mode.
•
You can switch menu screens from any menu item by rotating
the zoom lever.
Press [MENU/SET] to set.
•
The menu screen is switched to the recording screen in the
selected Scene Mode.
∫ About the information
•
If you press [DISPLAY] when selecting a Scene Mode in step
explanations about each Scene Mode are displayed. (If you press
[DISPLAY] again, the screen returns to the Scene Mode menu.)
Note
•
To change the Scene Mode, press [MENU/SET] and then press 1, and return to step
(when [MENU RESUME]
•
The Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed.
•
When you take a picture with a Scene Mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
•
The following items cannot be set in Scene Mode because the camera automatically adjusts
them to the optimal setting.
–
[FILM MODE]/[SENSITIVITY]/[ISO LIMIT SET]/[ISO INCREMENTS]/[METERING MODE]/
[I.EXPOSURE]/[MULTI EXPO.]/[MIN. SHTR SPEED]/[I.RESOLUTION]/[i.ZOOM]/[FLASH
SYNCHRO]
Advanced (Recording pictures)
(Scene Mode)
].
(P39)
is [OFF]).
2
,
- 92 -
2
above