Panasonic Lumix DMC-LX5 Operating Instructions Manual page 106

Digital camera model no. dmc-lx5
Table of Contents

Advertisement

Note
The screen will change as following when the motion picture button is pressed in steps
3
.
A Still picture recording
¢1
screen
B Motion Picture Mode
¢2
setting
C Motion picture
recording screen
D Still Picture Mode
¢3
setting
¢1 Set [REMAINING DISP.]
recording motion pictures.
¢2 The screen that is displayed during Motion Picture Mode setting is different depending on the
[REC MODE]
setting of the
¢3 [!] will not be displayed in the Creative Motion Picture Mode.
Refer to
P151
for the [MOTION PICTURE] Mode menu.
The flash setting is fixed to [Œ].
Refer to
P235
for information about the available recording time.
The available recording time displayed on the screen may not decrease regularly.
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
When recording motion pictures with the lens cap string attached, the sound of the lens cap
string brushing against the unit may be recorded.
The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
When operating the zoom in recording motion pictures, it may take time to come into focus.
If the Extra Optical Zoom was used before pressing the motion picture button, recordable area
will be changed drastically since these settings are cancelled.
Even if the aspect ratio setting is the same in still and motion pictures,
the angle of view may change at the start of the motion picture
recording. When [
during motion picture recording is displayed.
A: (Example image)
When [REC QUALITY] is set to [AVCHD Lite] (16:9).
B: This section is not recorded in motion pictures.
Advanced (Recording pictures)
(P33)
to [
.
REC AREA]
(P33)
is set to [ON], angle of view
10 10 10
] to display the available recording time before
- 106 -
2
and
R1m23s
R1m23s
R1m23s
3
3
s
s
A
B

Advertisement

Table of Contents
loading

Table of Contents