[Face Recog.]; [Af Mode] - Panasonic Lumix DMC-LX5 Operating Instructions Manual

∫ Setting the colour temperature
You can set the colour temperature manually for taking natural pictures in different lighting
conditions. The colour of light is measured as a number in degrees Kelvin. As the colour
temperature increases, the picture becomes more bluish. As the colour temperature
decreases, the picture becomes more reddish.
1
Select [ ] and then press 1.
2
Press 3/4 to select the colour temperature and then
press [MENU/SET].
•
You can set a colour temperature from [2500K] to [10000K].
For details on [REC] Mode menu settings, refer to P28.
Specify a person's face and use the Face Recognition functions.
Applicable modes:
[OFF]/[ON]/[MEMORY]/[SET]
Note
•
Refer to P113 for details.
For details on [REC] Mode menu settings, refer to P28.
This allows the focusing method that suits the positions and number of the subjects to be
selected.
Applicable modes:
[š]: Face Detection
¢
[ ]: AF Tracking
[ ]: 23-area-focusing
[Ø]: 1-area-focusing
¢ [ ] will be used during motion picture recording.
Ø
Advanced (Recording pictures)

[FACE RECOG.]

[AF MODE]

The camera automatically detects the person's face. The focus
and exposure can then be adjusted to fit the face no matter
what portion of the picture it is in. (max. 15 areas)
Focus and exposure can be adjusted to a specified subject.
Focus and exposure will keep on following the subject even if it
moves. (Dynamic tracking)
¢
Up to 23 points for each AF area can be focused. This is
effective when the subject is not in the centre of the screen.
(AF area frame will be same as image aspect ratio setting.)
The camera focuses on the subject in the AF area on the
screen.
- 134 -