You can add text (comments) to pictures. After text has been registered, it can be stamped
in prints using [TEXT STAMP] (P164). (Only alphabetic characters and symbols can be
entered.)
Select [TITLE EDIT] on the [PLAYBACK] Mode menu.
Press 3/4 to select [SINGLE] or [MULTI] and
then press [MENU/SET].
Select the picture, and then
press [MENU/SET] to set.
•
['] is displayed for pictures with titles
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat),
and then press [MENU/SET] to set.
•
The setting is cancelled when [DISPLAY] is pressed again.
Enter the text.
Press [‚] to return to the menu screen.
¢The menu screen is automatically restored when [MULTI] is selected.
•
Press [MENU/SET] to close the menu.
Note
•
To delete the title, erase all the text in the text input screen.
•
Text can be scrolled if all of the registered text does not fit on the screen.
•
You can print out texts (comments) using the "PHOTOfunSTUDIO 5.0 HD Edition" bundled
software on the CD-ROM (supplied).
•
You can set up to 50 pictures at one time with [MULTI].
•
You cannot use [TITLE EDIT] for the following types of pictures:
–
Motion pictures
–
Protected pictures
–
Pictures taken with [
–
Pictures recorded with other equipment
Advanced (Playback)
[TITLE EDIT]
(P153)
], [
] or [
]
- 162 -
[SINGLE]
Press 2/1 to select
the picture.
¢
(P28)
[MULTI]
Press 3/4/2/1 to
select the pictures.