Panasonic Lumix DMC-LX5 Operating Instructions Manual page 125

1
Press 2/1 to select a film and then press [MENU/SET].
•
When you press [DISPLAY] on the screen shown right,
explanations about each Film Mode are displayed. (When you
press [DISPLAY] again, the screen returns to the previous
screen.)
2
Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
∫ Adjusting each Film Mode to the desired setting
1
Press 2/1 to select a film.
2
Press 3/4 to select an item and 2/1 to adjust.
•
Registered settings are memorised even if the camera is turned
off.
3
Press 3/4 to select the [MEMORY] and then press
[MENU/SET].
4
Press 3/4 to select an item, and then press [MENU/SET].
•
You can register 2 settings. ([MY FILM 1] and [MY FILM 2])
(After registering, the Film Mode name that was registered
previously is displayed.)
•
[STANDARD] is registered in [MY FILM 1] and [STANDARD]
( ) is registered in [MY FILM 2] at the time of purchase.
Item
[CONTRAST]
[SHARPNESS]
[SATURATION]
[NOISE REDUCTION]
Advanced (Recording pictures)
Increases the difference between the brightness and the
[r]
darkness in the picture.
Decreases the difference between the brightness and the
[s]
darkness in the picture.
[r] The picture is sharply defined.
[s] The picture is softly focused.
[r] The colours in the picture become vivid.
[s] The colours in the picture become natural.
The noise reduction effect is enhanced. Picture resolution may
[r]
deteriorate slightly.
The noise reduction effect is reduced. You can obtain pictures
[s]
with higher resolution.
- 125 -
Effect