[Hi-Speed Burst] - Panasonic Lumix DMC-LX5 Operating Instructions Manual

Digital camera model no. dmc-lx5
Table of Contents

Advertisement

This is a convenient mode for shooting rapid movement or a decisive moment.
∫ Setting the speed priority or image priority
1
Press 3/4 to select [SPEED PRIORITY] or [IMAGE PRIORITY] and then press
[MENU/SET] to set.
2
Take pictures.
Still pictures are taken continuously while the shutter button is pressed fully.
2.5M (1:1), 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
Maximum Burst speed
Number of recordable
pictures
The Burst speed changes according to the recording conditions.
The number of Burst recording pictures are limited by the picture-taking conditions and the type
and/or status of the card used.
The number of Burst recording pictures increases immediately after formatting.
Note
It will be a normal motion picture recording during the motion picture recording.
The flash setting is fixed to [Œ].
[i.ZOOM] is fixed to [OFF].
[QUALITY] is automatically fixed to [›].
You can take pictures suitable for 4qk6q/10k15 cm printing.
The focus range is 1 cm (0.04 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶.
The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
The ISO sensitivity is automatically adjusted. Note, however, that the ISO sensitivity is set high
to achieve a high shutter speed.
Depending on the operating conditions, it may take time to take the next picture if you repeat
taking a picture.
Advanced (Recording pictures)

[HI-SPEED BURST]

approx. 10 pictures/second (Speed priority)
approx. 6.5 pictures/second (Image priority)
approx. 15 to 100
- 100 -

Advertisement

Table of Contents
loading

Table of Contents