Panasonic Lumix DMC-LX5 Operating Instructions Manual page 56

∫ Extra Optical Zoom mechanism
When you set the picture size to [
area is cropped to the centre 3M (3 million pixels) area, allowing a picture with a higher
zoom effect.
Note
•
The indicated zoom magnification is an approximation.
•
"EZ" is an abbreviation of "Extra Optical Zoom".
•
The Optical Zoom is set to Wide (1k) when the camera is turned on.
Zoom position is as when the power was turned off if the [ZOOM RESUME]
[ON].
•
If you use the Zoom function after focusing on the subject, focus on the subject again.
•
The lens barrel extends or retracts according to the zoom position. Take care not to interrupt
the motion of the lens barrel while the zoom lever is rotated.
•
When using the Digital Zoom, [STABILIZER] may not be effective.
•
When using the Digital Zoom, we recommend using a tripod and the Self-timer
pictures.
•
In the following cases, [i.ZOOM] is fixed to [ON].
–
Intelligent Auto Mode
–
Scene Mode ([i.ZOOM] cannot be used when in [HIGH SENS.], [HI-SPEED BURST] or
[FLASH BURST] in Scene Mode.)
–
[HIGH DYNAMIC], [DYNAMIC ART], [DYNAMIC] (
•
[i.ZOOM] cannot be used in the following cases.
–
[PIN HOLE] in My Colour Mode
•
The Extra Optical Zoom cannot be used in the following cases.
–
In [HIGH SENS.], [HI-SPEED BURST] or [FLASH BURST] in Scene Mode
–
[PIN HOLE] in My Colour Mode
–
When recording motion pictures
–
When [QUALITY] is set to [
–
[MULTI EXPO.]
•
[DIGITAL ZOOM] cannot be used in the following cases.
–
Intelligent Auto Mode
–
In [HIGH SENS.], [HI-SPEED BURST] or [FLASH BURST] in Scene Mode
–
[PIN HOLE] or [FILM GRAIN] in My Colour Mode
–
When [QUALITY] is set to [
–
[MULTI EXPO.]
–
When [CONVERSION] is set to [
Basic
] (3 million pixels), the 10M (10.1 million pixels) CCD
], [ ] or [ ]
], [ ] or [ ]
]
- 56 -
) or [FILM GRAIN] in My Colour Mode
(P34) is set to
(P74) for taking