Select [CONVERSION] on the [REC] Mode menu.
•
P150
Refer to
Press 3/4 to select [
Note
•
Lens adapter (DMW-LA6; optional) is needed to use the conversion lens.
•
When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
•
When the wide conversion lens is removed, set [CONVERSION] to [OFF].
•
When you take pictures at close range, the resolution of the periphery of the picture may
decrease slightly. This is not a malfunction.
•
Refer to operating instructions of the wide conversion lens for details.
•
Turn off the camera when removing the conversion lens.
•
When the [CONVERSION] is set to [
•
The supplied lens cap cannot be attached while the lens adaptor and the wide conversion lens
are attached.
for [CONVERSION].
], and then press [MENU/SET] to set.
], the flash is fixed to [Œ].
- 202 -
Others
(P28)