Registering The Key Operator Code Number - Sharp AR-235 Operation Manual

REGISTERING THE KEY
OPERATOR CODE NUMBER
A key operator code number must be registered before any key operator program can be used. The
key operator must remember this number. Only this registered number will allow access to the key
operator programs.
1 Press the SPECIAL FUNCTION key.
q
The SPECIAL FUNCTION screen will appear.
2
Use the
OK key.
q
The following display will appear.
3 Enter your key operator code number using the numeric keys.
q
When registering the key operator code number for the first time, enter the number that
was set at the factory. (See page 153.)
q
As the code number is entered, the dashes in the display will change to asterisks.
q
The MODE SELECT screen will appear with COPIER highlighted.
4 Press the OK key.
q
The COPIER MODE screen will appear with FUNCTION SETTING highlighted.
118
and keys to select "KEY OPERATOR PRG." and press the
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
Enter key operator
code.
KEY OPERATOR CODE:
-----