Special Functions; All Off Function; Autozapping; Universal Functions ("Punch Through") - Medion Remote Control Manual

SPECIAL FUNCTIONS

ALL OFF function

You can switch off all pre-programmed devices simultaneously. Proceed as
follows:
1. Briefly press the ALL OFF key. The selected device will be switched
off and the relative MODE key will light up.
2. Press the ALL OFF key immediately once again and keep it pressed
for approx. 3 seconds. Now, all pre-programmed devices are switched
off one after another. This will take about 3 seconds. Then, the MODE
key illumination will go out.
The remote control has to be pointed at the devices to be operated until the
MODE key goes out.
Some devices can be switched on and off by means of the POWER key.
Such switched off devices will be switched on after completion of the ALL
OFF function.

Autozapping

In case of TV operation, you will successively go through all stored
channels by once pressing the SHOWVIEW key (to that end, the remote
control has to be pointed permanently at the device). Press the CHAN key
once to finish the function.

Universal functions ("Punch Through")

The universal functions (also called "Punch Through" functions) allow you
to perform certain functions on another type of device than the selected
one. Example:
• while the remote control is in VCR, DVD, SAT or CBL mode, the
VOLUME and MUTE keys control the TV set;
15