Code Search; Manual Code Search - Medion Remote Control Manual

CODE SEARCH

Manual code search

To run a manual code search, proceed as follows:
1. Switch on the device (TV, VCR, etc.) manually which you want to
operate.
2. Keep the SETUP key pressed for approx. 3 seconds until the backlight
illumination of the MODE keys flashes shortly and then lights up
steadily. (By briefly pressing the "SETUP" key, you activated the SHIFT
function)
3. Release the SETUP key.
4. Briefly press the desired mode key (TV, VCR, DVD, SAT, DSAT, CD,
CBL, AUX).
5. Press several times in succession (up to 350 times) the "POWER" or
"PROG" (channel upwards) or "PLAY" (only applies to VCR) key until
the device to be controlled has been switched off or responds.
6. Briefly press the OK or ENTER key for storing the code.
In view of the extensive number of different code numbers, up to
350 different codes have already been pre-programmed per device
type. It is possible that only the most common main functions will be
available in individual cases. In case of some special device models,
the procedure described may fail to be successful.
Code search starts with the 3-digit number stored at the moment.
6