Programming Functions; Deleting Functions - Medion Remote Control Manual

Programming functions

Programming is carried out as follows:
1. Keep the SETUP key pressed for approx. 3 seconds until the backlight
illumination of the MODE keys flashes shortly and then lights up
steadily. (By briefly pressing the "SETUP" key, you activated the SHIFT
function)
2. Release the SETUP key.
3. Briefly press the desired MODE key (TV, VCR, DVD, SAT, DSAT, CD,
CBL, AUX).
4. Press the LEARN key.
5. Now press the key on the universal remote control with which the
respective function is to be programmed (the MODE key will
permanently light up).
6. Hold the key of your original remote control now down until the MODE
key of the universal remote control will go out once (each false
programming will be indicated by blinking of the key).
7. Repeat steps 5 to 6 until all desired functions are stored.
8. Press the SETUP key to end the programming.

Deleting functions

To delete all codes referring to a device selection key, proceed as follows:
1. Keep the SETUP key pressed for approx. 3 seconds until the backlight
illumination of the MODE keys flashes shortly and then lights up
steadily. (By briefly pressing the "SETUP" key, you activated the SHIFT
function)
2. Release the SETUP key.
3. Briefly press the desired MODE key (TV, VCR, DVD, CD, SAT, AUX).
4. Press the LEARN key twice.
5. Press the SETUP key.
All codes referring to the respective device selection key which had been
programmed by the LEARN function have now been deleted.
11