Code Identification - Medion Remote Control Manual

Code identification

The code identification allows you to identify codes that you have already
entered and that are memorised in the remote control. Proceed as follows:
1. Keep the SETUP key pressed for approx. 3 seconds until the backlight
illumination of the MODE keys flashes shortly and then lights up
steadily. (By briefly pressing the "SETUP" key, you activated the SHIFT
function)
2. Release the SETUP key.
3. Briefly press the key for the desired mode (TV, VCR, SAT). Each time
you press a key, the MODE key illumination will briefly go out.
4. Briefly press the SETUP key. Each time you press a key, the MODE
key illumination will briefly go out.
5. To find the first numeral, press the numerical keys from 0 to 9. When
the MODE key illumination goes briefly out, this is the memorised
numeral. To determine the second and the third number, repeat the
procedure.
6. The MODE key will go out as soon as the key for the third number has
been pressed.
7. The code identification has now been completed.
9