Executing a macro
1. To execute a macro, shortly press the MACRO key during normal
operation.
2. Then, press within 20 seconds the numerical key to which you have
assigned the macro ("1", "2" or "3").
Deleting macros
1. Keep the SETUP key pressed for approx. 3 seconds until the backlight
illumination of the MODE keys flashes shortly and then lights up
steadily. (By briefly pressing the "SETUP" key, you activated the SHIFT
function)
2. Release the SETUP key.
3. Press the MACRO key. The MODE key illumination will now go out
briefly.
4. Then press the numerical key ("1", "2" or "3") to which you have
assigned the macro you want to delete.
5. Keep the SETUP key pressed until the MODE key illumination goes
out. Now, the macro is deleted.
14