Shift Function - Medion Remote Control Manual

• while the remote control is in TV mode, the keys PLAY, STOP, PAUSE,
FAST FWD/BWD, SKIP and, if applicable, RECORD will control a
connected player or recorder.
Switching off the universal functions VOLUME/MUTE
You can perform the functions VOLUME and MUTE from any mode.
Accordingly, you can operate e.g. even the volume control of satellite
receivers or cable set top boxes when in TV mode.
You can switch these universal functions off altogether (to avoid that you
e.g. unintentionally change the volume on some device):
1. Press the TV key.
2. Keep the SETUP key pressed for approx. 3 seconds until the backlight
illumination of the MODE keys flashes shortly and then lights up
steadily. (By briefly pressing the "SETUP" key, you activated the SHIFT
function)
3. Release the SETUP key.
4. Keep the MUTE key pressed for approx. 8 seconds until the MODE
key flashes a second time.

SHIFT function

Some keys of the universal remote control can be allocated twice. To use
these functions, briefly press the "SETUP" key (MODE key lights up) and
subsequently one of the function or numerical keys.
If SETUP is pressed shortly but no further key is pressed within
15-20 seconds, the SHIFT function will not come into effect.
16