Advertisement
Manual URC 4689 UK Apr05.fm Seite 5 Montag, 11. April 2005 12:00 12
• Place the remote controls with the infrared diodes on a table so that they
point each other at a distance between 15 and 50 mm.
• You can store up to 150 commands. When the memory is full, the backlight
illumination of the MODE key will blink for 3 seconds.
• Each programming of a key can take approx. 3 seconds.
• Always chech that the key you wish to teach a code is free or does not
correspond to an important function.
• The following keys cannot be programmed with functions: LEARN, SET, ALL
OFF, P<P, SHOWVIEW and all MODE keys.
• First have a try by programming any desired code and testing it then.
Thereafter, delete all codes and proceed with the proper programming.
Do not use the learn function beneath an energy saving lamp.
Programming functions
1. Keep the SET key pressed for approx. 3 seconds until the LED indicator
lights continuously.
2. Release the SET key.
3. Briefly press the desired mode key (TV, VCR, DVD, SAT, DSAT, CD, CBL,
AUX). The LED blinks.
4. Press the LEARN key.
5. Now press the key on the universal remote control which will learn the
function (the LED will permanently light up).
6. Press the key of your original remote control until the LED of the universal
remote blinks once (each false programming will be indicated by blinking
of the LED).
7. Repeat steps 5 to 6 until all desired functions are stored.
8. Press the SET key to end the programming.
Deleting commands under one mode key
To delete all codes referring to a device selection key, proceed as follows:
1. Keep the SET key pressed for approx. 3 seconds until the LED indicator
lights continuously.
2. Release the SET key.
3. Briefly press the desired mode key (TV, VCR, DVD, SAT, DSAT, CD, CBL,
AUX). The LED blinks.
4. Press and release the LEARN key twice.
5. Press the SET key.
All learned commands entries under that mode are now cleared.
Deleting all commands under all modes
1. Keep the SET key pressed for approx. 3 seconds until the LED indicator
lights continuously.
2. Release the SET key.
3. Press and release the LEARN key twice.
4. Press the SET key.
All learned command entries are now cleared.
5
Hide quick links:
Advertisement
