Inserting The Batteries - Medion Remote Control Manual

Inserting the batteries

Insert 2 micro cells (size "AAA", type R03/
LR03; we recommend the use of alkaline
batteries) into the remote control as follows:
1. Remove the battery compartment cover,
sliding the clip towards the cover and
pulling it out.
2. Insert the two batteries into the
compartment observing the right
polarity +/–.
3. Put the battery cover back into place.
When exchanging the batteries, it may be necessary to reprogram
the unit. Hence it is advisable to record the codes needed for your
devices.
Used batteries do not qualify as household waste. The batteries
must be disposed of at a collection point for used batteries.
4