Table of Contents
Advertisement
Univ-FB_MD 81302_UK.fm Seite 30 Montag, 7. August 2006 11:08 11
Universal functions
("Punch Through")
The universal functions (also called "Punch Through"
functions) enable you to carry out certain functions on a
different device type than the programmed one. These are
the volume, mute and playback functions.
Playback functions
If the remote control is in TV, SAT or cable mode (devices
without playback function), the PLAY, STOP, PAUSE, FAST
FORWARD/BACK, and in some cases RECORD keys will
control a connected video recorder, DVD player or video
recorder. The DVD or VCR mode keys do not need to be
pressed in advance. The last selected device is activated.
This Punch Through control does not work if the
programmed TV, SAT or cable code has its own video
recorder function (for example in the case of a combined TV-
video recorder device).
Volume/mute
Image transmitting devices connected to a TV (e.g. TV, DVD,
VCR, SAT, CBL) often do not have their own volume control.
When the universal remote control is controlling this type of
device and the VOL (Volume) or (
pressed, the volume control is transferred to the TV.
You can modify this basic device setting (cf. both sections
below).
The volume/mute functions are referred to in the
shortened form VOL/MUTE below.
Programming the VOL/MUTE universal functions to
another device type
You can program the remote control so that the universal
functions VOL/MUTEwill control a device type other than the
TV set. Of course this device must have a volume control.
1. Keep the S (Setup) key pressed
down for approx. 3 seconds,
CODE SETUP
until
appears.
2. Press S again briefly to open
SYSTEM SETUP
.
VOL/MUTE
3. Press OK" The
SETUP
is displayed.
4. Press OK again. The following
ALL VOL.
menu is displayed
SET
. All VOL/MUTE commands
are programmed on a device
type that you select in the next
step.
ALL VOL
5. Press OK again. The
MODE?
query appears
) (Mute) keys are
30
Hide quick links:
Advertisement
Table of Contents
