Special Functions; All Off Function; Easy Programming And Tv Channel Preview - Medion MD 80383 Manual

Univ-FB_MD80383_AUS.fm Seite 22 Dienstag, 24. Januar 2006 8:57 08

Special functions

ALL OFF function

You can switch off all pre-programmed devices at the same time. This
is done as follows:
1. Briefly press the ALL OFF key. The selected device switches off
and the relevant source key will light up.
2. Immediately press the ALL OFF key again and keep it pressed
down for 3 seconds. Now all pre-programmed devices will be
switched off consecutively. This takes about 3 seconds. The
source key will extinguish afterwards.
Keep the remote control pointed at the devices to be operated until
the source key extinguishes.
Some devices can be switched on and off with the
switched off in such a way will be switched back on after carrying out
the ALL OFF function.

Easy ProGramming and TV Channel Preview

Easy ProGramming (EPG)
The button EPG (Easy ProGramming) refers to scheduled recording
features that would give you access to codes associated with TV and/
or Radio programs. The central concept of this system is a unique
number (G-Code) that is assigned to every broadcasted program.
This code is published in TV listings in newspapers and magazines .
By using these codes the correct program with the correct channel
and the correct time will be recorded. (Please note that not all devices
are compatible with this EPG button, and functionality may also vary
in different countries).
Please note: In some cases the EPG button may not be compatible
with your device for the above-described function. There may be the
possibility that this is allocated to another button on your remote
control (e.g. the MENU button).
- key. Devices
22