Charge Battery; Switch On; Emergency Call (Sos) - Siemens C35 User Manual

2. 2. 2. 2. Charge Battery

Charge Battery
Charge Battery Charge Battery
The new NiMH battery is not yet ful-
ly charged:
• Insert the charger plug into the
socket on the phone.
Press together to remove
• Plug charging unit into a mains
power socket (ensure voltage
range stated on charger is not ex-
ceeded).
The charging unit will heat up when
used for longer periods. This is nor-
mal and is not dangerous.
,
When charging is in
progress.
'
Charging is complete.
.
Charging Time Charging Time Charging Time Charging Time
The unit is fully charged after
2.5 hours.
Variations in the power supply can
lead to different charging times.
Telephoning Telephoning
Telephoning Telephoning
The telephone can be used while
charging is in progress.
Getting Started Getting Started
Getting Started Getting Started

3. Switch On

3. Switch On
(
If the error message "Please insert
your SIM card!" appears when you
switch on, please check if the SIM
card is correctly inserted.
Also, please note that older SIM
cards (5 volt technology) cannot be
used. Contact your service provider
if you have questions or encounter
problems.
Usage time Usage time
Usage time Usage time
A fully charged battery can provide
50 to 180 hours standby time or 90
to 300 min. talk time.
\
Charging status display.
*
A beep sounds when the
battery is nearly empty.
If you experience a reduction in us-
age time, carry out the battery care
function (page 52).
The times specified above are aver-
age times. They may vary depend-
ing on personal usage and network
conditions (see also "Technical
Specifications", page 66).
3. Switch On
3. Switch On
Hold down to activate,
in standby mode (see
page 8) hold down to
deactivate.

Emergency Call (SOS)

Emergency Call (SOS)
Emergency Call (SOS) Emergency Call (SOS)
By pressing the
can make an emergency call on all
networks even without a SIM card
or PIN code.
This function must only be used in
emergencies.
>
soft key, you
7