Security - Siemens C35 User Manual

Security

Security
Security Security
The phone and SIM card are protect-
ed from misuse by several security
codes.
Your SIM card is protected by a PIN
(Personal Identification Number).
A PIN2 is required for the additional
functions available with a special
SIM card.
A code (PUK) is also provided for un-
locking the SIM card if you have for-
gotten the PIN.
Your phone is protected by the
phone code, which you can enter
yourself when making the first secu-
rity setting (4-8 digits).
Keep these confidential numbers
in a safe place where you can ac-
cess them again if required!
Î Î
then select a function:
Babysitter Babysitter
Babysitter Babysitter
(Phone code)
Calls are limited to one call number
which is dialled with the right soft
key.
-
Enter the phone number
/
and name.
or
7
/ Select a number from the
phonebook.
Ending the Function: Ending the Function: Ending the Function: Ending the Function:
Hold down (phone code is
requested).
Setup Setup
Setup Setup
Allow only Allow only Allow only Allow only
(PIN 2/phone code)
Dialling options are limited to
numbers in the phonebook; new
entries cannot be made. If only local
codes are entered, the relevant
phone numbers can be added to
these before dialling.
Depending on whether the
phonebook is stored on the SIM
card or in the phone, the PIN 2 or the
code will be requested before
changes can be made.
Allow last 10 Allow last 10
Allow last 10 Allow last 10
(Phone code)
Calls are limited to the call list of the
"selected numbers".
The call list can be filled with specific
phone numbers for this purpose:
Delete the call list (page 44), then
create "new entries" by dialling
phone numbers and hanging up be-
fore a connection is made:
7 -
or
Loan Phone Loan Phone Loan Phone Loan Phone
(Phone code)
You can limit the use of the phone
by others.
The following general locks are set
with "Loan Phone":
•
page 54).
• Charge detail counter cannot be
deleted.
• Charge rate cannot be changed.
F
:
, followed by
active (see
53
(
.