Network - Siemens C35 User Manual

54
PIN Control PIN Control PIN Control PIN Control
The PIN is normally requested each
time the phone is switched on. You
can deactivate this control here, but
this would risk unauthorised use of
the phone by a third party.
Some service providers do not
permit this function.
Codes Codes
Codes Codes
Change PIN Change PIN
Change PIN Change PIN
You can change the PIN to any
4-8-digit number (i.e. a number you
may find easier to remember).
Î Î
Î
-
Enter the current PIN.
Press.
-
Enter the new PIN
/
-
Enter the new PIN again.
/
Change PIN 2 Change PIN 2
Change PIN 2 Change PIN 2
You can change PIN2 to any 4-8-digit
number (only displayed if PIN2 is
available).
Proceed as described under
.
Chng Phonecode Chng Phonecode
Chng Phonecode Chng Phonecode
You can change the phone code to
any 4-8-digit number.
Proceed as described under
.
Prevent newSIM Prevent newSIM Prevent newSIM Prevent newSIM
This prevents your phone from be-
ing used with another SIM card.
Setup Setup
Setup Setup

Network

Network
Network Network
Î
Line Line
Line Line
This function is only displayed if sup-
ported by the service provider.
Two independent phone numbers
are registered for the phone.
Select line Select line
Select line Select line
Select the currently used phone
number.
If this is changed frequently, it is
more convenient to make the selec-
tion using the soft key (see
page 17).
/
Lock Line Lock Line
Lock Line Lock Line
(Phone code, p. 53)
You can restrict usage to one phone
number.
Info Info
Info Info
Special settings can be made for
each phone number (e.g. melody,
call diversion, etc.). Switch to the
required phone number first.
To switch the lines (in standby
mode):

Î
then select a function:
Display the active phone
number.
Press, then:
Press.
D