Audio; Ringer Setting; Volume; Melodies - Siemens C35 User Manual

46
Î
,
then select one of the fol-
lowing functions:
###########
###########

Ringer Setting

Ringer Setting
Ringer Setting Ringer Setting
The ringer can be activated and
deactivated or reduced to a short
signal.
Display if ringer is
deactivated.
You can also activate/deactivate
the ringer without using the
menu:
Hold down in standby
mode (see page 8).

Volume

Volume Volume Volume
The volume can be set differently
for a variety of signals:
###########
F
###########
Display for increasing
volume.

Audio

Audio
Audio Audio
Any Call Any Call
Any Call Any Call
If two independent phone numbers
are registered for your phone, you
have the following choice:

Melodies

Melodies
Melodies Melodies
You can also set a melody instead of
a signal (same procedure as for
volume).
A variety of melodies are provided,
or you can compose your own melo-
dy (see page 47).

Vibration

Vibration
Vibration Vibration
If you do not wish to disturb those
around you, you can activate the vi-
brator instead of the ringer. This can
also be activated in addition to the
ringer (e.g. in a noisy environment).

Call Screening

Call Screening Call Screening Call Screening
Only those calls with phone
numbers stored in the phonebook or
VIP phonebook are signalled acous-
tically.
Other calls only appear on the dis-
play. If you do not answer these
calls, they will be diverted to your
mailbox (if activated, page 40).
L
###########
###########
Display when active.
D