In Call Menu - Siemens C35 User Manual

In Call Menu

In Call Menu
In Call Menu In Call Menu
The following functions are only
available during a call.
[
The menu is displayed;
now select the required
function.
###########
###########
Volume Control Volume Control Volume Control Volume Control
The left soft key is used
to adjust the handset
volume.
If Car Kit Comfort is used, this set-
ting does not affect the usual con-
figuration.
Microphone off Microphone off Microphone off Microphone off
You can switch the microphone on
or off. If it is switched off, the per-
son on the other end will not be able
to hear you.
Conference Conference
Conference Conference
(see page 20)
Hold Call Hold Call
Hold Call Hold Call
The current call is placed on hold.
Time/Cost Time/Cost
Time/Cost Time/Cost
You can check current call time and
cost (if programmed, see page 48).
During a Call During a Call
During a Call During a Call
Send DTMF tones Send DTMF tones Send DTMF tones Send DTMF tones
You may transmit control codes (dig-
it) for controlling an answerphone
and other devices.
From the Phonebook From the Phonebook
From the Phonebook From the Phonebook
Establish a connection with the de-
vice, then
[
7
Manual Entry Manual Entry Manual Entry Manual Entry
After a connection is established.
-
Call Transfer Call Transfer
Call Transfer Call Transfer
Join the original call to the second
one. You are no longer connected to
either call. This function may not be
supported by all service providers.
MAIN MENU MAIN MENU
MAIN MENU MAIN MENU
This is the fast way to access other
menus, for example, to check a
message (see also page 22).
Call Status Call Status
Call Status Call Status
All held and active calls are listed
(e.g. participants in a conference).
Open the call menu and
select
Press. Select the name of
the control code in the
phonebook.
enter the digits for the
/
control code.
21
.